How to install print cartridges in hp 6968 printer

#How to install print cartridges in hp 6968 printer drivers
#How to install print cartridges in hp 6968 printer driver

#How to install print cartridges in hp 6968 printer drivers

Restart the computer, printer and router to solve the errors that occur during the printer setup and reinstall the HP drivers and soft wares by downloading the latest printer software from 123.hp.com/ojp6968 or 123.hp.com/ojp6968.Your printer could not be found on your wireless networkДЇollow the below given steps to troubleshoot issues that may lead to network printer setup problems.After selecting the connection type if the installer does not detect the printer, one of the following errors might display

#How to install print cartridges in hp 6968 printer driver

The HP full feature driver on the software disc from the HP website uses a guided installer to setup the printer for a W i-Fi or wired network connection. HP PrintersвЂ“ not found during Network Driver Setup (Windows) Install the printer software by either downloading from 123.hp.com/ojpro6968 or using the CD that comes with the printer.Push the input tray forward until it snaps into place and lower the output tray.Slide the paper width guide to its outermost position and place the papers in tray.Load the paper into the input tray by pulling the input tray and lifting up the output tray.Turn the ink cartridge so that the ink cartridge contacts face downward, and then match the label color with the color dot on the carriage and slide it into its slot and press the ink cartridge.A ink might leak from the ink cartridge if you did not do this properly Check whether you have removed the orange pull-tab and plastic wrap completely before removing the orange cap.Open the cartridge door to remove the packing material from the cartridge.Before installing the ink cartridges you have to install the SETUP ink cartridges that came in the box with your printer.Set your preferences like country, region, date and time in the control panel settings and confirm you settings.Connect one end of the printer to the power cord and other end to an electrical outlet.Make sure you remove all the materials that are not necessary and recycle the items that are used for packing the printer and other accessories required by the printer.Remove the printer from the box and remove all the packing materials including tapes, stickers and cardboards.If the problem persists, move on to the next solution. Close the Cartridge Access Door, plug back the Power cord, and then turn on the device.Д¬onduct a test print.Try and check if the Carriage can move fully through its path by softly pushing it from side to side. Get rid of all other bits of pieces and foreign material you find inside the printer.Also, move the Carriage to the right if itвЂ™s held in the center. Move the Carriage to the left side if itвЂ™s stuck on the right, and vice versa.Insert your hand into the Ink Cartridge Access Area and then move the Carriage manually.If there are paper fragments that linger inside the printer, you can expect further jams to happen. Inspect from top to bottom for paper shreds that might be holding back the Carriage. Carefully take out any sheet of paper thatвЂ™s stuck inside using both your hands.Unplug the Power cord from the back of the device while itвЂ™s still on, as a safety precaution. Wait until the Carriage stops and become silent before you proceed. Please turn on your Canon printer and open its Ink Cartridge Access Door.If the problem is still there, proceed to the next solution. Plugin its Power cord and then press the Power button to turn on the device.Д¬onduct a test print. Turn the printer back to its original position.Try opening and closing the tray a few times until the tab gets into the slot if needed. Please make sure that the Paper TrayвЂ™s plastic tab is fixed securely on the retainer slot.Be sure to hold the Scanner Lid safely in place with your hands while rotating the device. Rotate the printer onto its side to gain access to its underside.Return the Paper Tray to its original position.If it is, however, youвЂ™ll need to replace the tray with a new one. Once you find that the Paper Tray isnвЂ™t warped, proceed to the next step.If thereвЂ™s a gap over 1 mm wide between the ruler and tray, the tray is warped. Make sure the Paper Tray is warped by putting a ruler or something straight beside the edge of the rear.Take out any paper from its Paper Tray and then detach the tray from the device.Please turn off your device and unplug its Power cord.